Error 614, 614 Error614, Error, Error 614
Error 614 |
Make sure the FIFO buffers are turned on if the user has a 16550 UART. If the
buffers are on, try juggling with their settings until the error goes away.
If this has no effect, then set the FIFO buffers to their default settings,
lower their port speed to 9600 and work the port speed up one step at a time
until the error repeats itself. Use the highest possible port speed that does
not make this error occur.
If the error occurs at 9600bps then the modem is possibly damaged, refer the
customer to their manufacturer
back to error list
back home
|
